Short:        DaynaPORT SCSI Sana-II Device Driver
Author:       Rob Smith <@RobSmithDev>
Uploader:     polluks+aminet sdf org (Stefan Haubenthal)
Type:         driver/net
Version:      1.3
Architecture: m68k-amigaos

BlueSCSI DaynaPORT "Mod" SANA-II Driver for Amiga
-------------------------------------------------
Created by RobSmithDev
https://github.com/RobSmithDev/daynaport-amiga
https://robsmithdev.co.uk

Blue/Zulu SCSI Configuration
----------------------
Create a blank file on the SD card called NE4.hda.  If you are already using device
number 4, then change this to a number you aren't using.

Installation
------------
Copy the scsidayna.device to devs:networks and then setup this device for your network
stack.  For example, follow the instructions in 
https://github.com/cnvogelg/plipbox/blob/master/doc/src/amiga.md

Configuration
-------------
For this driver to work it needs to be configured.
Included in this archive is a file called 'scsidayna.prefs'
This file needs editing and then copying to ENVARC:

scsidayna.prefs
---------------
device=    change to the SCSI driver for your card
deviceid=  The SCSI device ID the DaynaPORT device is on, or -1 for auto-detect
priority=  The task priority. 0 is recommended, 1 will give hgiher speed but slower machine
mode=      **VERY** important:
                      0: Original DaynaPORT Interface
                      1: Use with scsi.devie (A590/A2091)
                      2: Use with gvpscsi.device
autoconnect=0    If set to 1, the driver will attempt to connect to WIFI on startup
ssid=            The WIFI network name to connect to
key=             The WIFI password